1-STAGE PAINT CORRECTION

  • Wheels (including inner barrels) & wheel well liners cleaned and agitated with various detailing brushes
  • Entire vehicle “snow” foamed with a think layer of citrus based shampoo
  • Door jambs, gas cap door, exhaust tips, & badges cleaned with an APC
  • Hand washed with a microfiber wash mitt using the 2 Bucket Method with Grit Guards®
  • Paint dried using a plush & dense microfiber towel
  • Excess water blow dried – with warm, filtered air – from crevices, door jambs, mirrors, & trim
  • Exterior paint & all windows clay barred to remove above surface contaminants
  • Chemical – pH balanced – paint decontamination removes below surface contaminants
  • Paint thickness measured with a Paint Thickness Gauge before polishing stage
  • 1-stage paint correction (~60% – 90% reduction* of paint defects)
  • Headlights & taillights polished to remove haziness
  • Exterior plastic & rubber trim get UV protected
  • One (1) coat of Silica (SiO2) Nano spray coating applied to the paint, exterior glass, headlights/taillights, and plastic/rubber trim.

1-STAGE PAINT CORRECTION

TIME REQUIRED: 3-4 Hours
$300
  • PROPER PAINT PREP PRIOR TO POLISHING
  • 1-STAGE MACHINE POLISH
  • MODERATE TO FINE PAINT DEFECTS REMOVED (NO FILLERS)
  • PAINT PROTECTED WITH A SILICA SEALANT
Book Now